Synapse launchpad success

You must have at least 1000 SNP in staking (on the ERC20, Polygon or BSC network) or in LP itself. LP is counted twice. So if you have 1k SNPs in LP it counts as 2k SNPs.

You will need to pass our KYC (identity verification) when you log in to our platform. At the top of the screen, you will see a message telling you to complete the KYC - follow it.

If you need help with the KYC, post on the telegram channel: //KYC and our Bot will send a short tutorial on how to complete our KYC. If you are still having troubles, contact Fractal.id support, you'll find their contact on the Fractal.id page on the bottom right of the page. You can also ask for help on their telegram channel here.

At the bottom of this article you will also find our guide to going through the KYC procedure.

You may have ONLY ONE account, you must use the same Ethereum address on both platforms, ours and the fractal one, as well as the same email.

If you use different data, you will not pass the KYC procedure and you will not be able to participate in our collections. In the "My Account" tab you also have the possibility to add the address of your Solana wallet, which is required when taking part in collections for projects that are built on the SOL network. The most compatible wallet is the Phantom.app wallet

You must express your desire to participate in a project, before the deadline, by going to the details of your preferred project on our platform. You must then click on the button registering your desire to participate. Once you have done this, you will see a thank you, this means you have signed up.

After meeting the above conditions, the next step is to get some stable coins: USDC, USDT, BUSD, fUSD, 1USDC, 1USDT, bscUSDC, bscBUSD, BUSD_b.

And choose one of the Networks through which to buy: ETH/ERC20, BSC, Polygon (Matic), Avalanche, xDAI, KCC, OEC, Fantom, Huobi, Arbitrum, Harmony, Moonriver, Cronos, IoTeX, Optimism, Solana

If you wish to add a network, for example to Metamask, visit here, search for your preferred network, connect to your wallet and confirm that you wish to add the network.

Once you have selected the stablecoins and network from which you want to buy, make sure you also select the correct network at the top of our platform. This must be the same network as the one you are using.

1. Find the project of your choice and click invest.
2. Choose your network and stable coin.
3. Read and accept the SAFT.
4. Enter the amount you wish to deposit.
5. Confirm the amount and press BUY.

You can also make an overpayment, up to a maximum of five times the guaranteed allocation that our app has calculated for you. Please note that an overpayment does not guarantee the purchase of additional tokens. Whether you buy them or not depends on whether there are any free tokens left at the end of the collection. Any unused funds will be refunded to you according to the collection schedule.

If you have won an allocation in the GLEAM competition, you do not need to stake 1000 SNP. The only requirement in this situation is to conduct our KYC. You must do this before the end of the round.

Please note that there are also rounds for premium tiers on the platform. This means that you will not be able to participate in a round if you are not in the Premium tier.

Diamond Hands is a bonus that you can activate after at least 30 days of continuous token staking on our platform. You will earn extra tokens with it.

This means that 0.5% of the transaction fees will be distributed proportionally to the contribution of all individuals who earn Diamond Hands status. When you withdraw SNP tokens, you will lose your status but only from the pool you have withdrawn from, e.g. standard SNP or LP staking on the BSC/POLYGON network or ERC20 but never from both at the same time.

With the Diamond Hand status, you will also get a bonus in the form of an increase in the % APR of your staking.

1. The best choice is Metamask, this wallet supports most networks and is kept up to date by the manufacturer. We recommend installing the Metamask extension for your browser and using it to connect to our platform.

2. Ledger also works well with our platform, but remember to allow the hardware wallet to interact with external contracts in the wallet settings.

3. Trezor is discouraged, the manufacturer does not support the latest EIP updates which will cause this wallet to lose its functionality and not work properly with our platform.

4. Trustwallet is also not very stable, in case of problems we suggest exporting the wallet to Metamask. Here is a tutorial on how to do this wallet transfer.

We have two tiers, the first is for users below 20k SNP and the second is for users that own more than 20k SNP.

Information about tiers is contained in this medium article.

Additionally, typing //inf on the channel Bot will send you a message with a link to the article and to the various infographics.

Premium tier gives you the opportunity to participate in special rounds, provided only to premium members.

The various allocations will depend on the total pool that is collected in the given round of the project and on how many people want to take part in the given round. The total pool is then divided by the total SNP allocation points of all the people registered for the round and this gives us a dollar value per SNP allocation point. This varies with every project and as such is hard to estimate an average allocation value.

If you have 1000 SNPs - you get an allocation of size X, and if you have 3000 SNPs you get an allocation size 3 times higher.

To increase your guaranteed allocation, add more SNP tokens to the staking pool. Every 200 SNPs gives you 1 more allocation point. Each point increases your allocation. The minimum allocation varies by project and is around $0.3-13.

Everything is explained more exhaustively here.

A snapshot is taken at the end of each registration and applies to all rounds. You cannot increase your allocation points after the registration time has elapsed If you increase your points after the snapshot, it will increase your allocation in the next round.

Suppose your guaranteed allocation is X. You can overpay a maximum of 5 times your guaranteed amount in each collection: 5 times X.

Overpayment gives you the opportunity to buy an additional amount of tokens, only if other users conceded their own guaranteed allocation, or in the case that the given round doesn’t have enough people to complete the allocation.

If the system allows you to buy, for example, 5% of the 100% overpaid amount, the rest will be returned to you after the end of the collection within 24 hours. Check on-chain e.g. on bscscan.com transfers signed as "disperse. app" so the refunds are signed.

As you probably noticed on our platform there is a special rank for the users with the most tokens in staking.

VC tier is an opportunity to get into a special group whose secrets are open only for its members.

People who are at least in the TOP20 of the staking ladder will be invited to join the VC tier.

Here you can buy SNPs on the BEP20 network:
Pancackeswap

Here you can check the price of the token on the BEP20 network:
Dextools BEP20

Here you can buy SNPs on the ERC20 network:
Uniswap

This is where you check the token price on the ERC20 network:
Dextools ERC20

Here you can buy SNPs on the Polygon network:
Quickswap

Here you can check the price of the token on the BEP20 network:
Dextools Polygon

The SNP contract address on the ERC20 and BEP20 networks is the same:
0x6911f552842236bd9e8ea8ddbb3fb414e2c5fa9d

You must continue staking SNPs until you have completed your token purchase in that round, otherwise, your purchase will not be recognised and your funds will be refunded.

If you want to unlock SNP tokens, you must wait 7 days, as the tokens are locked in the staking contract, to give our platform time to release them. To do this, press the unlock request and then after 7 days press the unstake button to download the tokens from the platform to your wallet.

You also have the option to unload the tokens from your fee, this button will appear when you press the unloading request. When you click on the cancel fee button, you will be charged a 10% fee on the number of tokens you have staked, but you will not be charged the number of SNP tokens you have already earned as a reward for staking. The fee charged goes into the staking reward pool as a bonus.

The Stake option again transfers the tokens you have earned through staking back into the staking reward pool.

The collect to staking option moves the freed SNP tokens you get from vesting straight into the staking pool.

The collect rewards button, as the name suggests, sends the tokens you have earned from staking to your wallet.

1. You must have SNP tokens in your wallet, then log in to our platform, and enter the staking section.
2. On the left-hand side enter the number of tokens you wish to stack.
3. Confirm your request with your wallet and wait for confirmation.

After that, data will appear on the screen showing the number of tokens you have staked. If you don't see them, refresh the page and wait a moment.

Remember that you can stake on both ERC20/ETH and BEP20/BSC networks. Just switch to the appropriate network and have the SNP token in your preferred network.

To do this, use the Anyswap bridge available here.

Make sure you select the correct network from which you want to transfer tokens in the "From" section, then look at the "To" section below and check that you have selected the right network.

For example, if you want to swap SNPs from ERC20 to BEP20, you should select ERC20 in the "From" section and BEP20 in the "To" section.

Press swap and then confirm that you want to complete the transaction. Make sure you have BNB or ETH for the transaction fees.

When you add liquidity on Uniswap or Pancakeswap it is also possible to mine LPs on both networks, since DEXs like the one above reward liquidity providers with their liquidity tokens that reflect in your pool. With those tokens on your wallet, we are able to stake them on our platform.

By using this guide, you take full responsibility for your funds and your actions. Do not perform any actions other than those described in the guide - especially if you are new to the world of crypto investing.

By adding liquidity, you are made aware of what a "non-permanent loss" is and what the consequences are.

Intractable loss is the unwanted effect that occurs when the price of a deposited asset in a pool, changes from when it was deposited. The greater the change, the more exposed you are to it.

What determines the price of assets in a pool is the ratio between them in that particular pool.

If token X goes up and token Y stands still, sometimes traders arbitrage. They literally "take" the more valuable token from the pool, leaving the liquidity providers with the less valuable token. A drop in the value of deposited assets will mean a lower dollar value at the time of withdrawal than the one at the time of deposit.

Why is it profitable despite the loss? Uniswap charges 0.3% on each transaction, which goes directly to liquidity providers. Pancakeswap works similarly, the fee per trade is 0.17% so if there is a large volume of trading in a pool, providing liquidity is profitable, even if the pool is heavily exposed to "unsustainable loss". The larger your share of the pool, the more interest you will earn. By adding liquidity, you support the projects you provide it to.

1. Go to Pancakeswap pancake swap finance and connect there with your wallet.

2. Make sure you have added SNP and BUSD as a pair.

3. (Add SNP token) SNP token address: 0x6911f552842236bd9e8ea8ddbb3fb414e2c5fa9d

4. Then enter the preferred amounts for SNP and BUSD

5. Press the Approve button. Your wallet will ask you to confirm.

6. The button will light up. Click it. A window will appear telling you how much you will receive in return.

7. Confirm that you wish to complete the wallet transaction. After a short wait, you will see your LP token balance at the bottom of the page. Now you can log into the Synapse platform and enter the staking section. Enter the number of LP tokens you wish to stake and start staking!

LP token address: 0x4686913f5e375989346759300ce11612085e4f26

Synapse is running in the Uni/V2 environment. Do not add liquidity to another version. Uniswap pools operate on a 50/50 model.

By adding token X you must add the equivalent in Y.

1. Go to this Uniswap link.

2. Add liquidity in the same way as the above Pancakeswap example but in the V2 environment and only in the SNP/USDC pair.

3. When you add liquidity, you will receive UNIv2 LP tokens representing your pool. Then log into our platform by clicking here.

4. Press "Staking", find "Stake LP" - enter the number of LP tokens and stake the tokens. LP token address: 0x6b5fc4a09Ecfa187C4e5b26A52636d2495F78692

1. Connect to Quickswap.

2. Add liquidity for SNP/USDC. When you add liquidity, you will receive LP tokens representing your stake.

3. Then log in here.

4. Press "Staking", find "Stake LP" - enter the number of LP tokens and press "Stake LP" LP contract address: 0xa23eE8b7707A16b92d5B629FB5eE61A54BaA61Ab

No, tokens must be frozen and cannot be used again.

SNP is a fee-on-transfer token meaning that each transaction or token transfer takes a fee from the tokens used in that transaction.

The token fee will look like this in terms of percentages:

BSC 5% fee on transfer. 3% is burned, 1% goes to LP, and 1% to the Diamond Hands prize pool.

Polygon 5%. 3% is burned, 1% goes to LP, and 1% for the Diamond Hands prize pool.

ETH: 2% a fee goes entirely to the Diamond Hands prize pool.

You can only withdraw your funds, transfer them to a new address and report your old account data to us and we will remove the stolen account from our platform. We cannot transfer tokens from contracts, blocked or unblocked, in vesting.

The moment you remove the address, the account will be frozen and no one will be able to access it. Please make sure to take all the necessary steps to remove your funds as much as is possible before deleting your account.

If you notify us that you wish to delete your account, you will be able to create a new account with a new address.

We will also ask you to send us an email to confirm that you wish to cancel your account. You must write this email from the email that was used to create the lost account on the Synapse platform.

Support email: support@synapse.network

However, before taking any measure, please report your problem to the administration.

If you have sent funds to a contract address, you have lost them. Our platform has never accepted and does not accept this form of payment. If you hover your cursor over the address, you will also see a warning not to do this.

You will need to add SOL network only in case:

The project in which you are investing will mint and distribute tokens on the SOL network.

When you want to make a payment through SOL tokens.

In the above cases, to get a Solana address, you need to install the Phantom. app wallet and add a SOL address in the My Account tab on the Synapse platform.

1. Some of the most common problems are due to browser clogging with cookies. Delete all the cookies in your browser.

2. Make sure that your ad-blocking extensions are not also blocking our platform, disable AdBlock extensions if you have them.

3. If you are using a hardware wallet make sure you have updated your hardware, remember wallets like Trezor or Trustwallet are unstable, use Metamask.

4. For display problems, you can try the combination: shift+ctrl+r

5. Install the metamask extension for your browser (do not connect with wallet connect) and make sure you use the same wallet address when selling and the same network in our dapp and metamask.

If any of the points do not help, please install Brave (or any other browser besides Chrome), import the wallet, install the extension and try again.

1. Restart your computer, log in and out of our dapp and try again.

2. Disable ADBLOCK or BRAVE SHIELD or other ad blockers.

3. If you use BSC use another network to complete the purchase (BSC is charged). Enter the amounts manually without the decimal, buy the guaranteed amount first and then overpay.

4. If you use a hardware wallet, allow its settings to interact with contracts.

5. Uninstall google translator from your PC or browser.

6. If you have Trezor please let us know, and create a new account. Trezor does not support the latest updates.

7. If you don't see the purchased amount, please wait, the platform needs time to process everything that went on in the backend.

8. If you get an error during purchase related to a network other than ERC20 make sure you have entered the correct network RPC.

Choose a file from your computer’s disk or use a camera to capture your proof of address. Please make sure the picture is oriented horizontally.

Now just paste your ERC20 wallet address. The address must be the same as the one you used to create your account on our platform.

Now just upload the required photos of your national ID (front and back)

After that, you will need to wait couple minutes for the identity confirmation

Fractal.id needs a live photo of you to prove that you are a real person. This will only take a few seconds. You can finish this step via a mobile device.

Congratulations, you have completed all the operations, please pay attention to your registered email, it will receive the KYC result, or inform you if further operations are needed. As soon as Fractal.id verifies all your data correctly, you will be able to make full use of our launchpad!

On our platform find the link "Apply for fundraising" where you can define the scope of the collaboration and describe your project in detail. We reserve the right to contact only selected projects.